Horizon
Lurker
Joined: 10 May 2003
Posts: 145
Location: Regina, Saskatchewan, Canada
|
 Posted: Feb 05, 2004 5:19pm Post subject: |
 |
|
Heya... on most routers you need to enable somthing called port forwarding to go though routers. Basically using the router you open any port above 1024 ( I only use 1050 and 1051 ) and then specify that any connection to the routers WAN address on these ports get directed to your specific internal IP address ( ie: 192.168.2.3 )
After you have this done using your favorte irc client you specify the ports you will be using manually in our case 1050 to 1051.
Hope this helps. |
|
Register
Log in
